Introduction - Advantech FPM-40T User Manual

A.1 Introduction
Before you attempt to install the touchscreen driver, you should
carefully read the instructions in the relevant "read me" file stored in
the installation CD-ROM. The file path for the instructions in the
CD-ROM is:
D:\monmouse\
This is where you will find instructions for Win 95, DOS 3.1, Win
NT, and OS/2.
Note 1:
Note 2:
Note 3:
FPM-40T/S User's Manual
14
The touchscreen driver must be installed from the
CD-ROM supplied. The CD-ROM drive is designated
as "D" throughout this chapter.
The installation instructions assume that the
touchscreen is connected to COM1, and that the
mouse is connected to and set for COM2. Both of
these configurations are factory pre-settings.
The following illustrations of windows are examples
only. You must follow this manual's flowchart
instructions, and pay attention to the instructions
which then appear on your screen.