Table of Contents
Advertisement
Specifications
•
Disk drive support:
•
Four 1.5 Gb/s or 3 Gb/s SATA 3.5-inch disk drives
•
Conforms to Serial ATA 1.0 specification and Serial ATA II: Extensions
to Serial ATA 1.0 specification (SATA II, phase I specification)
•
SATA specification of 3 Gb/s transfers with CRC error-checking
•
FireWire 800 (IEEE 1394-2000) host interface x2
•
FireWire 400 (IEEE 1394-1995) host interface x1
•
USB 2.0 host interface x1
•
eSATA host interface x1
•
Hot-swapping of disk drives
•
Tagged command queuing
•
Native command queuing
•
Drive roaming among channels
•
S.M.A.R.T. status polled every 15 minutes
•
Hot spare drive
•
RAID Volume rebuilding
•
Background rebuilding
•
Spin-down in system Standby mode
•
RAID level support: RAID 0, 1, 5, and 10
•
Unicode file name support
•
SATA RAID Controller: Oxford Semiconductor OXUFS936QSE
•
USB port: USB 2.0, up to 480 Mb/s, Type-B connector
•
Power Supply: 90-100W with PFC, 100-230V auto-ranging, 50-60Hz AC
•
Error logging
•
Hardware monitoring of:
•
Fan
•
Temperature
•
Power
•
Temperature, Operating: 5° to 35°C (41° to 95°F)
•
Humidity, Operating: 10 to 85 percent
•
Dimensions (H x W x D): 188.2 x 152.5 x 229.6 mm (7.4 x 6.0 x 9.0 in)
•
Weight: 2.5 kg (5.5 lbs) without drives
Chapter 1: Introduction to SmartStor
•
Disk status
•
One-Touch button
•
Enclosure status
3
Advertisement
Table of Contents
