8.
EMI core
Power Supply
Retainer
Installing the Power Supply
To install the new power supply:
1.
Plug in the motherboard power connector.
2.
Lay the power supply into its cradle and slide it back into position.
Be sure the pads on the power supply are downward and the retainer is
holding the power supply in place.
3.
Lay the cover in position and press it down until the two latches snap shut.
4.
Turn the SmartStor over and set it on its feet.
5.
Plug in the power cord.
6.
Boot the SmartStor.
See "Connecting the Power" on page 9.
133
Appendix A: Maintenance
Motherboard
power
connector
Power Supply