Table of Contents
Advertisement
SmartStor DS4600 Product Manual
Setting Up the SmartStor
SmartStor has three setup options:
•
One Touch Configuration (page 16)
•
One Click Setup (see page 38 for further information)
•
Advanced Setup (see page 39 for further information)
One Touch Configuration
One Touch Configuration requires a FireWire 800 or 400 or USB 2.0 connection
to your PC. See "Connecting to Your PC" on page 8.
One Touch Configuration creates and formats a RAID volume according to the
number of disk drives installed in the SmartStor. This setup option is
recommended for most users.
Number of disk drives
Press and hold the One Touch Backup button for two seconds.
To use One Touch Configuration, all of your disk drives must be
free of any RAID configuration. They can be either free or spare
drives. Only previously used drives are affected.
1
2
3
4
Important
Configuration created by One Touch
Single Disk
RAID 1
RAID 5
RAID 5
16
One Touch
Backup Button
Advertisement
Table of Contents
