Table of Contents
Advertisement
4.
Screw
Screw
4.
Unplug the three-wire fan power connector at the motherboard.
5.
Gently press outward on the two retainer clips to release the fan.
Cooling Fan
Retainer clip
Installing the Cooling Fan
To install the new cooling fan:
1.
Gently press the new fan into position between the retainer clips on the back
cover.
Be sure that the fan is positioned to blow outward and the wires extend
toward the connector holes in the back panel.
2.
Attach the three-wire fan power connector at the motherboard.
3.
Place the back cover in position and install the four screws.
4.
Plug in the power cord.
135
Appendix A: Maintenance
Screw
Screw
Fan power
connector
Retainer clip
Connector
holes
Advertisement
Table of Contents
