Table of Contents
Advertisement
SmartStor DS4600 Product Manual
The firmware upgrade is proceeding.
When the upgrade is done, the SmartStor reboots automatically. When the
SmartStor beeps once, it is ready for use.
Please click the System Information button to confirm the firmware version
successfully upgraded.
Making Enclosure Settings
To make enclosure settings:
1.
Go to the Main Window.
See "Opening the Main Window" on page 19.
2.
Click the DAS Management icon (A) and click the Settings button (B).
3.
Click the Enable or Disable options for:
•
Buzzer (C)
•
Smart Fan (D)
•
Auto Boot (E)
An enabled buzzer warns you of any problems with the DAS
system.
An enabled fan saves energy and reduces noise.
Note
34
Advertisement
Table of Contents
