Table of Contents
Advertisement
5.
Place the carrier with the new disk drive back into the open slot in the
SmartStor.
If the failed drive belonged to a RAID Volume, the RAID Volume will begin
rebuilding as soon as the new drive is installed.
During the Rebuild, the Disk Status LED show amber. When the Rebuild is
finished, the Disk Status LED turns blue.
If the replacement drive is free, that is, not assigned to a RAID Volume or as a
spare, the Disk Status LED remains dark after you install the new drive.
SmartStor Lockup
On rare occasions, SmartNAVI becomes unresponsive to your inputs. If that
happens, check the SmartNAVI Main Window on your PC. See Figure 2.
Figure 2. SmartNAVI Main Window
The SmartStor appears
here when it is working
properly
111
Chapter 5: Troubleshooting
Advertisement
Table of Contents
