Selecting The Line Mode - Panasonic KX-TG2481CB Operating Instructions Manual

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Visual Call Waiting Service may not be used (p. 52). Your
phone comes from the factory set to "A".
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press or
2
Ö
points to "Program".
3 Press
FWD/EDIT á
4 Press or
Ö
points to "Set line mode".
5 Press
FWD/EDIT á
Press or
6
Ö
7 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base Place on cradle and try again." is displayed.
.
repeatedly until the arrow
Ñ
(Yes key).
repeatedly until the arrow
Ñ
(Yes key).
to select "B" or "A".
Ñ
(Save key).
H
Save directory
Ringer volume
GF H
=Yes
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes
H
Set line mode
Set dial mode
GF H
=Yes
Line mode
GF H
=Save
Line mode
GF H
=Save
Line mode
:A
:B
:B
17