Flash Button - Panasonic KX-TG2481CB Operating Instructions Manual

Special Features

FLASH Button

Pressing
(FLASH/CALL!WAIT/PLAYBACK)
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)". Your phone comes from the factory set to
"700 ms".
Make sure the unit is in the standby mode initially.
1 Press
(FUNCTION/EXIT/CH)
2 Press
Ö
points to "Program".
Press
3
FWD/EDIT á
Press
4
Ö
points to "Set flash time".
5 Press
FWD/EDIT á
6 Press
Ö
desired time is displayed, and press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing
(FUNCTION/EXIT/CH).
•If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc.). Consult your PBX supplier for the correct
setting.
56
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the
Ñ
(Save key).
allows you to use special
.
H
Program
LCD contrast
GF H
=Yes
Save DIRECT#
H
Set flash time
GF H
=Yes
Flash time
:700ms
GF H
=Save