Panasonic KX-TG2481CB Operating Instructions Manual page 77

2.4ghz digital cordless answering system
Table of Contents

Advertisement

Problem
You cannot have a
conversation using the
handset.
You cannot have a
conversation using the
headset.
Answering System
Problem
The answering system is on,
but incoming messages are
not recorded.
You cannot listen to the
recorded messages.
"
" is displayed and the
FULL
ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
You cannot operate the
answering system at the
base unit.
You cannot operate the
answering system from a
touch tone phone.
Remedy
•When the headset is connected (p. 72),
you must use the headset to talk with
the caller. To have a normal cordless
phone conversation, disconnect the
headset.
•Make sure that the headset is connected
properly (p. 72).
Remedy
•The recording time is set to "Greeting
only". Select "1 minute" or "3 minutes"
(p. 27).
•Memory is full. Erase some, or all, of the
messages (p. 61).
•Make sure that the unit is in the standby
mode.
•Memory is full. Erase some, or all, of the
messages (p. 61).
•The handset user is operating the
answering system, or is engaged in an
outside call. Wait until the IN
USE/CHARGE indicator light goes out.
•Make sure you enter the correct remote
code.
•The answering system may not respond
if the tones are too short to activate the
unit. Press each button firmly.
•The answering system is off. Turn it on
(p. 67).
77

Advertisement

Table of Contents
loading

Table of Contents