Selecting The Line Mode - Panasonic KX-TG2670N Operating Instructions Manual

Settings

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the Call Waiting Caller ID Feature may not be used (p. 52), and
the unit may not alert your pager (p. 58). Your phone comes from the
factory set to "A". Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/CH)
Press
2
Ö
points to "Program".
Press
3
á
Press
4
Ö
points to "Set line mode".
Press
5
á
Press
6
Ö
Press
7
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If the handset has lost communication with the base unit, an alarm tone sounds
and "No link to base. Place on cradle and try again." is
displayed.
•If 3 beeps sound and the display shows "Save error", move closer to the base
unit and start again from step 1.
14
.
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or to select "B" or "A".
Ñ
(Save key).
H
Save directory
Ringer volume
GF H
H
Program
Calling pager
GF H
H
Save DIRECT#
Set flash time
GF H
H
Set line mode
Talk switching
GF H
Line mode
GF H
=Save
Line mode
GF H
=Save
Line mode
=Yes
=Yes
=Yes
=Yes
:A
:B
:B