Panasonic KX-TG2680N Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Answering Machine
  5. KX-TG2680N
  6. Operating instructions manual
Panasonic KX-TG2680N Operating Instructions Manual

Panasonic KX-TG2680N Operating Instructions Manual

2.4ghz cordless answering system
Hide thumbs Also See for KX-TG2680N:
Table of Contents

Advertisement

Quick Links

Download this manual
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 8 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
2.4GHz Cordless Answering System
KX-TG2680N
Model No.
Operating Instructions
Pulse-or-tone dialing capability
Caller ID Compatible

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TG2680N

Summary of Contents for Panasonic KX-TG2680N

  • Page 1 PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 8 hours before initial use. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico 2.4GHz Cordless Answering System KX-TG2680N Model No. Pulse-or-tone dialing capability...

  • Page 2: Before Initial Use

    Please read IMPORTANT SAFETY INSTRUCTIONS on page 92 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller’s name and phone number, then announce the displayed caller’s...

  • Page 3: For Best Performance

    For Best Performance Battery Charge A rechargeable Nickel-Metal Hydride (Ni-MH) battery powers the handset. Charge the battery for about 8 hours before initial use (p. 11). Base Unit Location/Noise Calls are transmitted between the base unit and the handset using wireless radio waves.

  • Page 4: Table Of Contents

    Selecting the Number of Rings ......26 Cordless Telephone Making Calls ........27 With the Handset .
  • Page 5 Dialing from the Directory ......51 Editing an Item in the Directory ......52 Erasing an Item from the Directory .

  • Page 6: Location Of Controls

    Location of Controls Base unit (LOCATOR/INTERCOM) Charge Contacts (p. 12) Speaker (p. 21, 31) (FLASH/CALL!WAIT) (PAUSE) MIC (Microphone) (p. 20, 30, 33, 54) DIGITAL SP-PHONE (Speakerphone) /HEADSET Button and Indicator (p. 30, 33, 79) Antennas (p. 3, 10) Button (p. 54) Button (p.
  • Page 7 (GREETING!CHECK) Button and Indicator (p. 58, 59, 61) (ANSWER!ON) (GREETING!RECORD) (ERASE) Button (p. 57) (TONE) Button (p. 42, 43, 53) (CLEAR) CALLER ID Indicator (p. 36) (EXIT) Button (p. 20) Button (p. 20) Button (p. 21, 61) Button (p. 40) (EDIT) Button (p.
  • Page 8 Location of Controls Handset Ringer/Charge Indicator (p. 11, 33, 45) Back side Speaker (p. 28) Button (INTERCOM) (p. 54) Headset Jack (p. 78) (Talk) Button (p. 27, 33) (Speakerphone) Button (p. 28, 33) Navigator Key (p. 15, 22, 28, 37, 50) Charge Contact (p.

  • Page 9: Displays

    Displays Handset 0 new call $The directory icon displays when storing or viewing the directory items (p. 46, 50). %The battery icon indicates the battery strength (p. 11). Standby mode: While the handset is off the base unit, the display becomes blank after you finish using the handset (making/answering a call, viewing the Caller List or directory list etc.).

  • Page 10: Settings

    Settings Connections Raise the antennas. •USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQWATG2650N). •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, see page 81.

  • Page 11: Battery Charge

    Battery Charge Insert the handset in the cradle. The ringer/charge indicator will light and a beep will sound. Charge for about 8 hours before initial use. •If the battery has been fully charged, the ringer/charge indicator light will turn from red to green.

  • Page 12: Battery Information

    •If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating “Recharge battery” and/or “ to flash. Battery information After your Panasonic battery is fully charged (p. 11): Operation While in use (TALK)

  • Page 13: Selecting The Dialing Mode

    Selecting the Dialing Mode You can program the dialing mode using the handset near the base unit. If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”. Your phone comes from the factory set to “Tone”. Make sure the unit is in the standby mode initially.

  • Page 14: Selecting The Line Mode

    Settings Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 56), and the unit may not alert your pager (p. 62). Your phone comes from the factory set to “A”.

  • Page 15: Programmable Functions

    Programmable Functions You can program the following function items using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH) <Function menu>* Save directory...

  • Page 16: Setting The Auto Talk Feature

    Programmable Functions Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the unit is in the standby mode initially.

  • Page 17: Setting The Talking Caller Id Feature

    Setting the Talking Caller ID Feature After subscribing to a Caller ID service, the handset and the base unit will display a caller’s name and phone number (p. 34). Name and telephone number Caller ID service is required. This Talking Caller ID feature allows the unit to announce a displayed caller’s name through the handset and base unit speakers while a call is being received (p.

  • Page 18: Selecting The Ringer Volume

    Programmable Functions Selecting the Ringer Volume With the handset You can set the handset ringer volume to HIGH, LOW or OFF. If set to OFF, the handset will not ring, and a caller’s name will not be announced with the handset even if the Talking Caller ID feature is ON (p. 17). Your phone comes from the factory set to HIGH.

  • Page 19: With The Base Unit

    With the base unit You can set the base unit ringer volume to HIGH, LOW or OFF. If set to OFF, the base unit will not ring, and a caller’s name will not be announced with the base unit even if the Talking Caller ID feature is ON (p.

  • Page 20: Preparing The Answering System

    Preparing the Answering System Greeting Message You can record a personal greeting message of up to 2 minutes. If a greeting message is not recorded, one of two pre-recorded greetings will be played when a call is received (p. 21). All messages (greeting, incoming, etc.) are stored in digital memory (p.
  • Page 21 To adjust the speaker volume: 9 levels (0–8) are available while using the answering system. To increase, press To decrease, press Ö Greeting message sample “Hello, this is (your name and/or number). Sorry I cannot take your call. Please leave a message after the beep. Thank you.” To erase the recorded greeting message Press (GREETING!CHECK)

  • Page 22: Programming Summary For The Answering System

    Preparing the Answering System Programming Summary for the Answering System You can program the following functions using the handset near the base unit. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH) press (Yes key). á Press to select “TAD program”, and press Ö...

  • Page 23: Selecting The Caller's Recording Time

    Selecting the Caller’s Recording Time You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s recording time. Your phone comes from the factory set to “3 minutes”. Press (FUNCTION/CH) Press repeatedly until the arrow Ö Ñ points to “Program”. Press (Yes key).

  • Page 24: Day And Time Adjustment

    Preparing the Answering System Day and Time Adjustment Voice Time/Day Stamp: During playback, a synthesized voice will announce the day and time that each message was recorded. Press (FUNCTION/CH) Press Ö Ñ points to “Program”. Press (Yes key). á Press Ö...
  • Page 25 Press (Save key). á •The unit announces the day/time. The clock starts working. •If 6 beeps sound, the setting is not correct. Start again from step 5. •To return to the standby mode, press (OFF). •In step 7, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, and select “PM”...

  • Page 26: Selecting The Number Of Rings

    Preparing the Answering System Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”*. Your phone comes from the factory set to “3”. Press (FUNCTION/CH) Press...

  • Page 27: Making Calls

    Making Calls With the Handset For best performance, extend the antenna fully (p. 8). Receiver Microphone Press Dial a phone number. •The dialed number is displayed. •After a few seconds, the display will show the length of the call and the battery strength. To hang up, press handset on the base unit.
  • Page 28 Making Calls To have a hands-free phone conversation (Using Digital Duplex Speakerphone) Press •The button lights. Dial a phone number. •The dialed number is displayed. •After a few seconds, the display will show the length of the call and the battery strength. When the other party answers, talk into the microphone.

  • Page 29: Lighted Handset Keypad

    If noise interferes with the conversation Extend the antenna fully, press or move closer to the base unit. To redial the last number dialed on the handset Press and press To dial after confirming the entered number Dial a phone number. •If you misdial, press (CLEAR) and dial again.

  • Page 30: With The Base Unit

    Making Calls With the Base Unit Speaker Press (DIGITAL!SP-PHONE) •The DIGITAL SP-PHONE indicator lights. Dial a telephone number. When the other party answers, talk into the MIC (microphone). To hang up, press •The indicator light goes out. •To switch to the handset while using the base unit speakerphone: —If the handset is off the base unit, press —If on the base unit, just lift up.
  • Page 31 Hands-free Digital Duplex Speakerphone For best performance, please note the following: •Talk alternately with the caller in a quiet room. •If the other party has difficulty hearing you, press speaker volume. •If the other party’s voice from the speaker cuts in/out during a conversation, press Ö...

  • Page 32: Simultaneous Keypad Dialing

    Making Calls Simultaneous Keypad Dialing You can use the base unit like a standard telephone. After pressing to make a call with the handset near the base unit, you can also dial using the base unit keypad. Handset: Press Base unit: Dial a telephone number while hearing a dial tone on the handset.

  • Page 33: Answering Calls

    Answering Calls When a call is received, the unit rings, “Incoming call” is displayed and the ringer/charge indicator flashes. If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p. 34). The caller’s name will be announced after the second ring (Talking Caller ID feature, p.

  • Page 34: Caller Id Service

    Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party’s information will be shown on the handset and base unit displays after the first ring.
  • Page 35 •Caller information cannot be displayed in the following cases: •—If the caller dialed from an area which does not provide a Caller ID service, “Out of area” will be displayed and announced. •—If the caller has requested not to display his/her information, “Private caller”...

  • Page 36: To Check The Number Of New Calls

    Caller ID Service To check the number of new calls When new calls have been received, the CALLER ID indicator flashes on the base unit. The handset and base unit displays show the number of new calls. Ex. You have received 10 new calls. While the handset is on the base unit: Handset display 10 new calls...

  • Page 37: Using The Caller List

    Using the Caller List Viewing the Caller List You can view the caller list with the handset or the base unit. Caller List information includes the caller’s name and phone number, the time and date the call was received, and the number of times that caller called. Make sure the unit is in the standby mode initially.

  • Page 38: Calling Back From The Caller List

    Using the Caller List What “√” means When the display shows “√”, you have already viewed this calling information, answered the call, called back the caller or played back the message (p. 59). If the same caller calls again, the call entry with “√” will be replaced with the new call entry.

  • Page 39: Editing The Caller's Phone Number

    Editing the Caller’s Phone Number You can edit a phone number into one of 4 patterns using the handset or the base unit. Make sure the unit is in the standby mode initially. With the handset Press to enter the Caller List. Ö...
  • Page 40 Using the Caller List With the base unit Press Ö Ñ List. Press Ö Ñ the desired caller. Press to select a pattern. (EDIT) •Each time you press (EDIT), the number is rearranged into one of 4 different patterns. Phone no. Area code c 1 –...

  • Page 41: Storing Caller List Information In The Directory

    Storing Caller List Information in the Directory You can store names and phone numbers that are in the Caller List into the directory. You can also turn the call group feature on for certain callers (p. 45). Storing must be carried out with the handset. Make sure the unit is in the standby mode initially.

  • Page 42: Erasing Caller List Information

    Using the Caller List Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries with the handset or the base unit. Make sure the unit is in the standby mode initially. To erase a specific caller from the Caller List With the handset: Press Ö...
  • Page 43 To erase all entries in the Caller List Before erasing all entries, make sure that “0 new call” is displayed. With the handset: Press to enter the Ö Ñ Caller List. 0 new call =Directory Press (CLEAR) Exit All clear Press to select “All Ö...

  • Page 44: One-Touch Dialer

    One-Touch Dialer You can store a phone number in the stored number is dialed with a one-touch operation. Storing a Phone Number in the DIRECT Button Make sure the unit is in the standby mode initially. Press (FUNCTION/CH) Press Ö Ñ...

  • Page 45: Dialing The Stored Number In The Direct Button

    Dialing the Stored Number in the DIRECT Button Press (DIRECT) •The stored number is displayed. Press •The number is dialed. •You can also dial the stored number by pressing (DIRECT). •If your line has rotary or pulse service, any access numbers stored after pressing (TONE) will not be dialed.

  • Page 46: Storing Names And Numbers In The Directory

    Using the Directory Storing Names and Numbers in the Directory Store a name and number, then if required, turn the call group feature on for the item. Storing must be carried out with the handset. Make sure the unit is in the standby mode initially. Press (FUNCTION/CH) While the arrow points to “Save...
  • Page 47 To turn the call group feature on, select “On” by pressing Ü If not required, select “Off”. •When “On” is selected, the display will light in orange and a different ringer pattern will be “Off” heard. When ringer pattern will be heard. Press (Next key).

  • Page 48: Selecting Characters To Enter Names

    Using the Directory Selecting Characters to Enter Names The handset dialing buttons ( used to enter letters and symbols. The letters are printed on the dialing buttons. Pressing each button selects a character as shown below. Keys Blank Ü To move the cursor to the left á...
  • Page 49 For example, to enter “Tom Jones”: Press (FUNCTION/CH) While the arrow points to “Save directory”, press Press Press six times, then press move the cursor to the right. Press four times. Press twice to enter a blank. á Press Press six times, then press move the cursor to the right.

  • Page 50: Finding Items In The Directory

    Using the Directory Finding Items in the Directory You can search the directory using the handset or the base unit. Make sure the unit is in the standby mode initially. With the handset/base unit Press Ü á Press Ö Ñ •The first item is displayed.

  • Page 51: Dialing From The Directory

    Index table Keys Index Other symbols, 1 A, B, C, 2 D, E, F, 3 G, H, I, 4 J, K, L, 5 •You can leave the directory list any time. If using the handset, press (OFF). If using the base unit, press (EXIT) or (STOP). •If “No items stored”...

  • Page 52: Editing An Item In The Directory

    Using the Directory Editing an Item in the Directory You can edit a name and phone number of a stored item and change the group setting (p. 45). Programming must be carried out with the handset. Make sure the unit is in the standby mode initially. Press Ü...

  • Page 53: Erasing An Item From The Directory

    Press (Next key). Ö •If you want to change the storing name, number or group setting, press Ñ (Edit key) repeatedly to reach the desired display and change it. Press (Save key). á •A beep sounds. •To continue editing other items, repeat from step 3.

  • Page 54: Intercom

    Intercom A 2-way intercom is possible between the handset and the base unit. Paging the base unit from the handset Handset: Press (INTERCOM) paged party after the beeps. •“Intercom” is displayed. Base unit: When the other party’s voice is heard, answer using the MIC. Handset: To end the intercom, press (OFF)

  • Page 55: Transferring A Call Using The Intercom

    During an intercom call: •Intercom calls can only be ended with the handset. •If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing Ö. •If an incoming call is received, the intercom call stops and the unit starts to ring.

  • Page 56: Special Features

    Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user.

  • Page 57: Temporary Tone Dialing (For Rotary Or Pulse Service Users)

    Temporary Tone Dialing (For Rotary or Pulse Service Users) Press before entering access numbers which require tone dialing. (TONE) •The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse.

  • Page 58: Automatic Answering Operation

    Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded. While recording, “- Answering -” will flash on the base unit display. •The total recording time (including greeting message) is about 15 minutes.

  • Page 59: Listening To Messages

    Listening to Messages You can see the total number of recorded messages on the base unit display. If the ANSWER ON indicator flashes, new messages have been recorded. Listening to only new messages Press (NEW!MESSAGE) •The unit announces the number of new messages and plays them back.

  • Page 60: From The Handset

    Listening to Messages For Caller ID service users During playback, the base unit display will show the name and/or number of the caller whose message is being played. To call back the displayed number: During playback, press •The unit stops playback and automatically dials the displayed phone number. •After listening to new incoming messages, “√”...

  • Page 61: Erasing Messages

    Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: —“Memory full” is heard. —“Message full” flashes on the base unit display. —the ANSWER ON indicator flashes rapidly. Erase some, or all, of the messages.

  • Page 62: Pager Call

    Pager Call This feature allows you to alert your pager when the unit records an incoming message or receives a Caller ID call (p. 66). You can retrieve the message from a touch tone telephone (p. 68). If you subscribe to a Caller ID service, the caller’s telephone number will be displayed on your pager.
  • Page 63 Press (Save key). á •A beep sounds. •To return to the standby mode, press (OFF). * Pager companies require a delay after the pager number and/or the access code is dialed. Contact your pager company regarding the required pause time. Pressing 3.5 second delay and counts as one digit.

  • Page 64: Storing Your Home Telephone Number

    Pager Call Storing Your Home Telephone Number After storing your home telephone number, it will then be displayed on your pager when your family wants you to call home. (See useful information on page 65.) Press (FUNCTION/CH) Press Ö Ñ points to “Program”.
  • Page 65 To confirm the stored pager and home numbers 1. Press (FUNCTION/CH) 2. Press to select “Calling pager”. Ö Ñ 3. Press (Yes key). á 4. Press •The unit dials the stored pager number. •The pager beeps, and displays your home number and “11”*. •If the pager does not beep or does not display your home number and “11”, store the pager and home numbers again (p.

  • Page 66: Pager Mode Setting

    Pager Call Pager Mode Setting After subscribing to a Caller ID service (p. 34), you can select one of the following pager mode settings. The unit will alert your pager: Recorded MSG: After the unit records an incoming message Received call: If you want to change the mode, proceed as follows.

  • Page 67: Setting The Unit To Call A Pager

    Setting the Unit to Call a Pager Press (FLASH/CALL!WAIT/PLAYBACK) •The number of new messages is heard on the handset. Press •“ ” is displayed on the PAGER base unit. •If “ ” is not displayed, the PAGER pager number has not been stored.

  • Page 68: Remote Operation From A Touch Tone Phone

    Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. A synthesized voice menu will guide you on how to operate the unit (p. 70). •To skip the voice menu and operate the unit directly, see page 72.

  • Page 69: Setting The Remote Code

    Setting the Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99). The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”. Use the handset near the base unit.

  • Page 70: Voice Menu

    Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press 1 to play back new messages. Press 2 for other functions. Press 1 to record your message. Press 2 for other functions.
  • Page 71 All Message Playback All recorded messages are played back. At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 5 minutes. New Message Playback Only new messages are played back.

  • Page 72: Direct Remote Operation

    Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up anytime. Direct commands NEW MESSAGE PLAYBACK...
  • Page 73 PAGER CALL ON/OFF ANSWERING SYSTEM OFF Turning on the answering system Call your unit and wait for 15 rings. •The unit will answer and the greeting message will be played. •The answering system will turn on. Hang up or enter the remote code for other options.

  • Page 74: Remote Operation With The Handset

    Remote Operation with the Handset You can operate your answering system with the handset. The announcements and recorded messages can only be heard with the handset. Summary of remote operation Press (FLASH/CALL!WAIT/PLAYBACK) •The number of new messages is heard. •“Remote operation” is displayed on the handset. Enter the desired direct commands (p.

  • Page 75: Direct Commands

    Direct commands NEW MESSAGE PLAYBACK ALL MESSAGE PLAYBACK REPEAT (During playback) SKIP (During playback) STOP ERASING A (*) (4) SPECIFIC MESSAGE (During playback) ERASING ALL (*) (5) MESSAGES PAGER CALL ON/OFF ANSWERING SYSTEM OFF ANSWERING SYSTEM ON •Only new messages are played back. •All messages are played back.

  • Page 76: Wall Mounting

    Wall Mounting This unit can be mounted on a wall phone plate. Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. •The word “UP” should face upward. Connect the telephone line cord.

  • Page 77: Using The Belt Clip

    To charge the handset battery: Insert the handset in the cradle and adjust the angle of the cradle in the direction of the arrow as shown. •The ringer/charge indicator lights. Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip Ringer/Charge Indicator To remove the belt clip...

  • Page 78: Using An Optional Headset

    Using an Optional Headset Plugging an optional headset into the handset or the base unit allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88 headset. To order call the accessories telephone number on page 2. With the Handset...
  • Page 79 With the Base Unit Connecting the headset to the base unit Connect the headset to the headset jack as shown. (EXIT) (DIGITAL!SP-PHONE/HEADSET) Making/Answering calls Press (DIGITAL!SP-PHONE/HEADSET) •If you misdial when making a call, press (DIGITAL!SP-PHONE/HEADSET) twice and dial again. To hang up, press To adjust the headset receiver volume (High, Medium or Low): While using the headset, press To switch to the speakerphone while using the headset:...

  • Page 80: Battery Replacement

    Battery Replacement If “Recharge battery” is displayed and/or “ fully charged, replace the battery with a new Panasonic HHR-P509 (PQHHR150AA23) battery. To order, call the accessories telephone number on page 2. Remove the cover by sliding it up while pressing the arrow.

  • Page 81: Adding Another Phone

    Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66. To order, call the accessories telephone number on page 2. Standard Telephone Single-Line Telephone Jack...

  • Page 82: Fashion Plate Tm Snap-On Color Covers (Optional)

    Fashion Plate Covers (Optional) You can change the look of your phone’s handset with optional Fashion Plate snap-on color covers, KX-TGA10. Three different color covers are included; brownstone, charcoal and wineberry. To order, contact your dealer or call 1-800-211-PANA(7262) to locate a dealer. Remove the battery cover by sliding it up while pressing the arrow.
  • Page 83 Unlock the other tab by pressing horizontally (#) and vertically ($), and partially pull down the color cover (%) in the same way. Completely remove the cover from the handset. Place the new color cover, fitting the tabs on the cover into the slots on the handset.

  • Page 84: If The Following Appear

    If the Following Appear... If the unit detects a problem, one of the following messages will be displayed on the handset or the base unit. Handset display Recharge battery No link to base. Place on cradle and try again. Please lift up and try again Directory full Not available...

  • Page 85: Base Unit Display

    Base unit display SUN 12:00AM 0 message Greeting record Recording error SUN 12:00AM Message full Handset in use When the clock needs adjusting, the day and time flashes with “ ”. Adjust the clock (p. 24). Your greeting message was not recorded correctly.

  • Page 86: Before Requesting Help

    Before Requesting Help Cordless Telephone Problem “No link to base. Place on cradle and try again.” is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset and/or the base unit do not ring.
  • Page 87 Problem The unit does not display the caller’s name and/or phone number. The unit does not announce the displayed caller’s name. The handset or base unit display goes to the standby mode while viewing the Caller List. When a second call is received during a conversation, the unit does not display the new caller’s...
  • Page 88 Before Requesting Help Problem You cannot redial by pressing (REDIAL/PAUSE) (REDIAL) Answering System You cannot have a conversation using the headset. Answering System Problem The answering system is on, but incoming messages are not recorded. You cannot listen to the recorded messages.
  • Page 89 Problem You cannot operate the answering system at the base unit. You cannot operate the answering system from a touch tone phone. You cannot operate the answering system with the handset. While recording a greeting message, the unit starts to ring and stops recording.
  • Page 90 Before Requesting Help General Problem The unit does not work. You cannot program items, such as the dialing mode. Previously programmed information is erased. “Recharge battery” is displayed on the handset, “ ” flashes or the unit beeps intermittently. You charged the battery fully, but “Recharge battery”...
  • Page 91 If you cannot solve your problem. Remedy •This is normal. •Call our customer call center at 1-800-211-PANA(7262). •Panasonic’s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY...

  • Page 92: Important Safety Instructions

    Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 11. Read and understand all instructions. 12. Follow all warnings and instructions marked on this unit. 13.
  • Page 93 CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery(ies) specified. 2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. 3.

  • Page 94: Fcc And Other Information

    FCC and Other Information If requested by the telephone company, inform them as follows: FCC Registration No..... . (found on the bottom of the unit) Ringer Equivalence .
  • Page 95 • If there is any trouble — disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your...

  • Page 96: For Product Service

    Symptom •Send the unit to an authorized servicenter, prepaid and adequately insured. •Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products. Panasonic Consumer Electronics Company,...

Table of Contents