Setting The Remote Code - Panasonic KX-TG2481CB Operating Instructions Manual

Setting the Remote Code

The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is "11". If you do not program your own
remote code, you can use "11".
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press or
2
Ö
points to "Program".
3 Press
FWD/EDIT á
4 Press or
Ö
points to "TAD program".
5 Press
FWD/EDIT á
•"P" is displayed on the base unit.
6 Press .
(1)
•The current remote code is displayed on the
base unit.
Enter a remote code using a 2-digit
7
number (00–99).
8 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
•If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
•The current remote code is displayed on the base unit. When finished, press
(FUNCTION/EXIT/CH).
.
repeatedly until the arrow
Ñ
(Yes key).
repeatedly until the arrow
Ñ
(Yes key).
(Save key).
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes
Talk switching
H
TAD program
GF H
=Yes
Refer to manual
or see label
on base unit.
63