Selecting The Line Mode - Panasonic KX-TC1733B Operating Instructions Manual

Settings
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to "B".
Your phone comes from the factory set to "A".
Make sure the unit is in the standby mode.
1
2
Press R_E-DIAL/PAU SE/FUNCTI_.
Press _ or _ repeatedly until the arrow
points to "Program".
Program
_Save directory
Ringer volume
Ringer volume
_Program
Save directory
TAD program
_LCD contrast
Set flash time
Set flash time
_Set line mode
Set dial mode
Line mode :A]
TA k=Save]
Line mode :B]
Press EDIT(_.
Press [_ or (_ repeatedly until the arrow
points to "Set
line mode".
5
6
Press EDIT [_.
Press _ or (_ to select "B" or "A".
Press EDIT_ (Save key).
eA beep sounds.
• To return to the standby mode, press _,
• You can exit the programming mode any time by pressing _,
!6