Panasonic BB-HNP15A Operating Instructions Manual page 62

Operating Instructions
Setting
Enable/Disable
Timer Name
Timer Schedule
Recording Method
Executing
Commands for
Detection
Sensor deactivation
time
Note
• If you click
cancel it, disable the timer. The timer recording start time/stop time can also
be changed by right clicking on the camera image in the multi-monitoring
page, and selecting [Start timer recording] or [Stop timer recording] from the
menu.
• If you set time period over midnight, the image is divided into 2 images at
midnight.
62
Enable or disable timers.
• Timer recording is available only when a timer is enabled.
Disabled timers do not record.
Enter a timer name. (Maximum 24 characters.)
The timer name is displayed on the timer list page.
To set a timer, set start time, end time and the day of the week.
• Checking [Daily] sets the daily timer recording during the
specified time period.
• If you set the day of the week, check [Day of the Week
Setting] and specify the day or multiple days of the week.
If the day of the week is not checked, the timer recording is
not set.
• To record images for a full day, set the same start and end
time. If you specify the same time for both start and end, the
end time will be considered to be the next day.
Select timer recording, motion detection recording only or
alarm detection recording only.
• A time period before and after detection can be set for
motion and alarm recordings. If you do not set a time period,
images are recorded only at the motion is detected or an
alarm is detected.
• To set [all Alarm and Sensor], [Alarm1/Sensor] or [Alarm2],
check [Set the Alarm1/Sensor Recording]/[Set the Alarm2
Recording] on the [Alarm/Sensor] setting window of the
individual cameras.
If motion detection recording or alarm detection recording is
chosen for the recording method, you can specify the
commands to execute when motion or an alarm is detected.
To limit unnecessary continuous detection, set the deactivation
time between detections.
, during timer recording, timer recording is not canceled. To
Description