Panasonic BB-HNP15A Operating Instructions Manual page 143

Message
Enter English one-byte character
in "Proxy User Name".
Enter English one-byte character
in "Proxy Password".
Do you apply the proxy settings to
all cameras? But IPv6 address
cameras are excepted.
"Port" is already set on the proxy
server settings. Cannot input port
number over again in the "Proxy
Server Address". Check the port
number and try again.
The proxy server could not be
authenticated. The IP address and
port number settings may be
incorrect. Do you want to keep
these settings?
The proxy server authentication is
not available. Enter the correct
user name and password, and try
again.
IPv6 connection is not supported
for proxy server. Set the IPv4
address or URL of the IPv4
domain name service.
Multi-Monitoring
If [Total Page] is set as [1], [Switch
the multi pages in order] cannot be
specified.
All frames cannot be selected.
Cause and Remedy
→ Follow the instruction message.
→ Follow the instruction message.
• You checked [Use a proxy server] at proxy
server settings on the preferences page. (If no
cameras are registered, this message will not
be displayed.)
→ Follow the instruction message.
• You set a port number for both the "Proxy
Server Address" and the "Port".
→ Follow the instruction message.
• The proxy server cannot be accessed.
→ Check the address and port number of the
proxy server.
• This software does not pass the proxy
authentication.
→ Check the user name and password of the
proxy server.
→ Follow the instruction message.
• This function is available when there are
multiple pages.
→ Follow the instruction message.
• You cannot select all of the frames when
enlarging an image frame.
→ Follow the instruction message.
Operating Instructions
143