Panasonic BB-HNP15A Operating Instructions Manual page 114

Operating Instructions
• The [Remote Access Authentication] page will be displayed when the remote
server connection is successful.
5.
Enter the user name and password configured for the remote server and click
[OK].
• If you enter the administrator name and password, the client connects a
remote server with administrator privileges. If you enter the general user
name and password, the client connects a remote server with general user
privileges. See the following table for differences between administrator and
general user privileges.
Note
• The first time you connect to a remote server, the remote client registration
code is automatically registered on the client control page of the remote
server.
• Only one remote client can be connected to a remote server at a time. You
cannot connect to a remote server if another client is already connected.
An error message is displayed if you try to connect to a remote server if
another client is connected.
• Use the same version of the software in the remote server and remote client.
Functions available for remote access
Multi-Monitoring
Camera Image
Change the camera layout
Change the Image display format
Switch page
Start/stop recording
Camera operations
Audio mute
Enable/disable
114
Function name Administrator
privileges privileges
O
O
O
O
O
O
O
O
User Simultaneous
launch*
O O
X X
X X
O O
X O
O O
O O
X X
1