Panasonic BB-HNP15A Operating Instructions Manual page 30

Operating Instructions
Setting
Cell Sensitivity
Before or After
Detection
Executing
Commands for
Detection
Note
• Check motion detection by using the motion detection monitoring window,
and adjust the settings accordingly.
• You can center the camera image on the desired point by right-clicking in the
motion detection monitoring window (see page 52).
30
Set the sensitivity in a cell.
Specify the number of seconds to record before and after the
motion is detected.
You can specify commands that execute for motion detection.
You can configure commands in [Detection Commands] page
(see page 34).
Description