Using The Camera Operation Bar - Panasonic BB-HNP15A Operating Instructions Manual

2.3.2

Using the Camera Operation Bar

You can use the camera operation bar that is displayed on the multi-monitoring
page to operate the camera.
1.
Select [Window]
Left End
[Camera Operation] on the menu bar.
a. Preset Display
a
b
c
Refresh
b.
d
c. Pan/Tilt
1
Scan *
d. Pan/Tilt/Home
Position * 1
e
Preset
e.
Button* 1
Zoom* 1
f.
f Focus* 1
g.
h. Brightness* 2
g
h
i. White
2
Balance *
i
j. Output
j
k. Resolution/
Image Quality
k
If a feature is not permitted, the buttons will be disabled.
The operation bar differs depending on the camera type.
*1 If the camera disables their controls, you cannot control their features.
*2 If the camera disables their controls, they may be unable to function.
When the lens has reached the end of its pan, tilt
range, the appropriate message will be displayed here
([Up End], [Down End], [Right End], [Left End]).
Additionally, when a preset is selected, the name of
the preset is displayed here. If a camera has limited
controls, "Locked" is displayed.
The latest registered buttons are displayed (see page 55).
Moves the lens throughout the horizontal (
vertical ( ) range, and returns to the original position.
Controls lens direction. Pan (
Tilt ( : Up, : Down) and Home Position (
(See page 55).
(See page 54).
(See page 54).
Allow you to change the brightness of the displayed image.
Click [-] to darken the image, [+] to brighten the image,
and [STD] to return the image to the standard brightness
level.
Allows you to select the white balance of the camera ([Auto
(Default)], [Indoor], [Fluorescent (White)], [Fluorescent
(Daylight)], [Outdoor], [Hold]).
Allows you to remotely control external devices that are
connected to the camera. Set according to the external
device that is connected.
Displays resolution/image quality. Change these
settings on the camera's settings page (see page 25).
Operating Instructions
) or
: Left, : Right),
: Center)
53