4.
Click [Yes].
• After you restart the program, it will operate as a remote server.
Setting
Use Remote
Access Connection
Server Settings
Note
• Available functions differ for administrator privileges and general user
privileges (see page 114).
• You cannot use remote access until you configure the administrator or
general user settings.
• Clear the [Use Remote Access Connection] check box to use the program as
a normal recording software.
• To use remote access via the Internet, configure a port for port forwarding.
For details on configuring port forwarding, see your router's documentation.
Select this check box when you are using remote access
functions.
Select [Operate as a server] to use as a remote server.
• Port
Enter a port number. (Enter a number from 1 to 65535, except
for 10081. Default is 10082.)
• Admin User Name/Admin Password
Enter the user name and password to use for administrator
privileges (4 to 15 alphanumeric characters).
• User Name/User Password
Enter the user name and password to use for general user
privileges (4 to 15 alphanumeric characters).
Description
Operating Instructions
111