Panasonic BB-HNP15A Operating Instructions Manual page 164

Operating Instructions
Settings
164
Items
Motion Motion is not detected
Detection during the pan, tilt or zoom
operation of the camera.
Motion Detection Analysis
Frequency
Sensor deactivation time
Threshold to Start
Recording
Cell Sensitivity
Before detected/
After detected
Executing Commands for
Detection
Alarm/ Set the Alarm1/Sensor
Sensor Recording
Alarm enable condition
Before detected/After
detected
Executing Commands for
Detection
Sensor deactivation time
Set the Alarm2 Recording
Alarm enable condition
Before detected/After
detected
Executing Commands for
Detection
Sensor deactivation time
Detection Commands for Camera
Commands External Output Settings
Optional Command
Controlling Command
Execution
Default
Motion is not detected.
0.50 seconds
-
slightly low
Center
After detected: Record
images for 5 seconds.
-
-
Status : Open (High)
After detected: Record
images for 5 seconds.
-
-
-
Status : Open (High)
After detected: Record
images for 5 seconds.
-
-
Short to GND, After 5
seconds, set the
external output of the
camera to [Open].
Beep 1000 1000
Execute a command
only once at the start of
recording