Panasonic BB-HNP15A Operating Instructions Manual page 25

Setting
Data Format
Image Quality
Audio Recording
Settings
Resolution
Recorded
Frequency
Calculated disk
capacity to record
Recording images
Note
• If you select the MPEG-4 format, CPU usage will be higher. To reduce CPU
usage, select [Specify the frame rate] from [Preferences] → [Multi-monitoring],
and set the frame rate to a low value.
• If you selected the MPEG-4 format, the following confirmation window will be
displayed.
Select the data format for the camera. [JPEG (Default),
MPEG-4]. (If the camera does not support the MPEG-4 format,
this option will be disabled.)
Select the image quality for the camera when using the JPEG
format. [Favor Clarity, Standard (Default), Favor Motion].
(If using the MPEG-4 format, this option will be disabled.)
Select to record the image with audio or only images.
Select the resolution of the image.
The resolutions that are available depend on the camera and
data format. Default is 320 x 240.
Set the interval at which to record images when using the
JPEG format. [Not Specify, Specify (Record images at
specified interval)]
If you record images as they are set on the camera, set to [Not
Specify].
If you select [Specify], [Display the error message if the program
does not work in the specified frequency] will be enabled.
Select this option if you want to display the error message (see
page 26).
(If using the MPEG-4 format, this option will be disabled.)
The estimated amount of necessary disk space is calculated
based on the number of days of recorded that is specified.
[1 to 60 days. Default is 30 days]
Select whether to display an error message when, during
recording, image data cannot be obtained for 1 minute.
Description
Operating Instructions
25