To The Hi-Speed Usb Cable - Microtek ArtixScanDI 8040c User Manual

To the Hi-Speed USB Cable

4. Connect one end of the Hi-Speed USB cable to your computer.
5. Connect the other end of the Hi-Speed USB cable to the scanner's USB port.
6. Turn the power switch at the back
Note: It takes a while for your scanner to warm up. Please do not turn the scanner
off when it is in the warming-up process; otherwise, it may cause serious damage
to your scanner.
14 ArtixScan DI 3020c / 8040c User's Manual
panel of your scanner to "On", and
wait for the lights at the front-left
panel to stop blinking and stay on
steady.
The system will detect your scanner
automatically. Power switch