Step 3: Unlocking The Scanner; Step 4: Connecting The Scanner; To The Power Adapter - Microtek ArtixScanDI 8040c User Manual

Step 3: Unlocking the Scanner

1. Remove the yellow "Step 3" sticker from your scanner.
2. With the scanner power off, tilt the scanner and locate the locking switch at
the bottom left corner of the scanner. Do not turn the scanner upside down
when attempting to unlock, as this may damage the scanner's mechanism.
3. Push the locking switch to the position as indicated in the graphic, with the
icon on the lock showing as "unlocked".
Note: To lock the scanner (for shipping and other purposes), turn the locking
switch to the "Locked" position. When unlocking the scanner, do not turn the
scanner upside down when locking the scanner back.

Step 4: Connecting the Scanner

To the Power Adapter

1. Remove the yellow "Step 4" sticker from your scanner.
2. Connect the power adapter to the back of the scanner.
3. Plug one end of the power cord into the power adapter, and plug the other
end of the power cord into a wall outlet or other power source.
Unlocked
ArtixScan DI 3020c / 8040c User's Manual
Locked
13