Replacing Parts; Right Cover - Royal Sovereign RSH-1151 Service Manual

Note: While replacing parts:
a. Make sure the power plug is unplugged from the power outlet.
b. Open both side covers and rear cover.
3.1 Replacing the Right Cover.
a. Take out the pressure lever (Figure 1) and four cover screws using Phillips screw driver (Figure 2).
b. Pull out the male control panel connector from the Sub-PCB. Figure 3
c. Loosen two screws from Sub-PCB and install on to new Right Cover. Figure 4
d. Follow the reverse order to assemble the Right Cover back.

3. Replacing Parts

Figure 1
Figure 3
18 ~ 22
Figure 4
14
Figure 2