Replacing Parts; Right Cover - Royal Sovereign RSC-1651LS/LSH Service Manual

3. Replacing Parts

NOTE : Before replacing any parts, ensure that the machine is turned off and
unplugged from the outlet.

3.1 Right Cover

1. Using Philips Screw Driver, loosen the screw on the Pressure Lever. Figure 1
Figure 1
2. Take out the four screws as shown in Figure 2.
Figure 2
3. Disconnect the temperature sensor (RSC-1651LSH only) and control wires
from the Sub-PCB. Figure 3
WIRE SENSOR
Figure 3
8