Heaters; Cross Cutter - Royal Sovereign RSH-1151 Service Manual

3.6 Replacing the Heaters
Note: Cotton or surgical gloves are recommended while handling the heater assembly.
a. Disassemble Right and Left Covers (Refer to "Replacing Right Cover" and "Replacing Left Cover").
b. Take out the heater brackets on each side by loosening the nuts and screws (Figure 8, 9, & 10).
Figure 8
c. Take out the broken heater. Figure 11
Figure 11
Note:
a. When inserting the heater into the roller, rotate the heater slightly and push the rod in gently.
b. Use an air blower to blow out the broken pieces of heating rod.
(Please ensure that no one is standing on the other side.)
3.7 Replacing the Cross Cutter
a. Disassemble the nut from the Frame-Cutter.
b. Unfasten the spring from the cutter.
c. Change the Cutter.
d. Assemble the Cutter by reversing the above steps.
Figure 9
16
Figure 10