Table of Contents
Advertisement
S
S
UPER
ERVER 6028R-T/TT User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6028R-T/TT lies the X10DRi/X10DRi-T, a dual
processor serverboard based on Intel's PCH C612 chipset. Below are the main
features of the X10DRi/X10DRi-T (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRi/X10DRi-T supports single or dual Intel E5-2600 (V3) Series (Socket
R3) processors in LGA 2011 sockets. Please refer to our web site for a complete
listing of supported processors (www.supermicro.com). Note that with only a single
processor installed (into the CPU1 socket), PCI-E slots 4~6 will not function.
Memory
The X10DRi/X10DRi-T has sixteen DIMM slots that can support up to 1 TB of
ECC registered/unbuffered DDR4-2133/1866/1333/1600 memory. Please refer to
Chapter 5 for details on installing memory.
SATA
A SATA controller is integrated into the chipset to provide a ten-port SATA 3.0
subsystem, which is RAID 0, 1, 10 and 5 capable. Six ports are supported by the
Intel PCH: I-SATA0-5 (I-SATA 4 and 5 are colored yellow to indicate that they have
embedded power to support SATA DOMs) and four are supported by the Intel SCU
(S-SATA0-3).
PCI Expansion Slots
The X10DRi/X10DRi-T has three PCI-E 3.0 x16 and three PCI-E 3.0 x8 expansion
slots. Note that the PCI slots are controlled by the CPU so some slots may not be
available when two CPUs are not installed on the board at the same time. See the
serverboard layout in Chapter 5 for details.
I/O Ports
The color-coded I/O ports include one COM port, a VGA (monitor) port, four USB
ports, two Ethernet LAN ports (10 Gb ports on the X10DRi-T and 1 Gb ports on
the X10DRi) and a dedicated IPMI LAN port.
Graphics Controller
The X10DRi/X10DRi-T features an integrated Aspeed 2400 controller.
1-2
Advertisement
Table of Contents
