Supero 6028R-TT User Manual page 80

S S
UPER ERVER 6028R-T/TT User's Manual
Installing/Removing Hot-swap SATA Drives
1. Push the release button on the drive carrier.
2. Swing the handle fully out and use it to pull the drive carrier straight out (see
Figure 6-4).
Note: Your operating system must have RAID support to enable the hot-plug ca-
pability of the drives.
Release Button
Caution: All of the SATA drive carriers must remain in the drive bay to maintain proper
cooling airflow.
Figure 6-4. Removing SATA Drives
6-6