[3D Frame Delay]; [3D Test Mode]; [3D Test Pattern] - Panasonic PT-DZ21K2 Operating Instructions Manual

[0.5ms]
[1.0ms]
[1.5ms]
[2.0ms]
[2.5ms]
[2.7ms]
Note
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
f The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use.

[3D FRAME DELAY]

Adjust the timing of the left-right switch of an image.
1) Press as to select [3D FRAME DELAY].
2) Press qw to switch the item.
[0us] - [25000us]
f The adjustment range depends on the input signal.

[3D TEST MODE]

Set the image display mode for use with 3D system adjustments.
1) Press as to select [3D TEST MODE].
2) Press qw to switch the item.
[NORMAL]
[LEFT/LEFT]
[RIGHT/RIGHT]
[LEFT/BLACK]
[BLACK/RIGHT]
Note
f The [3D TEST MODE] setting returns to [NORMAL] when the projector is switched off.
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
f This function is disabled when [3D TEST PATTERN] is displayed.

[3D TEST PATTERN]

The 3D test pattern can be used to check operation and make adjustments even without a 3D signal.
1) Press as to select [3D TEST PATTERN].
2) Press qw to switch the item.
Menu screen + input screen
Menu screen + left: white/
right: black
Menu screen + left: black/
right: white
Note
f When the [DISPLAY OPTION] menu → [RGB IN] → [RGB1 INPUT SETTING] (x page 113) is set to [VIDEO] or [Y/C], the 3D test pattern
cannot be displayed while the <RGB 1 IN> terminal is selected.
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
106 - ENGLISH
Chapter 4 Settings — [3D SETTINGS] menu
Sets an item so that 3D setting is made correctly.
Sets the amount in 10 us increments.
Normal setting.
Displays the image of the left eye input signal for both the left and right eye image.
Displays the image of the right eye input signal for both the left and right eye images.
Displays the image of the left eye input signal for the left eye image, and all black images for the right
eye image.
Displays all black images for the left eye image, and the image of the right eye input signal for the
right eye image.
Select a test pattern that is easy to check operation or make adjustment.