Table of Contents
Advertisement
Section 5 - Tools
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin
Enter a new password for the Administrator Login Name. And
Password:
type it again in the next box.
Enable Remote
Remote management allows the DIR-840 to be configured
Management:
from the Internet by a web browser. A username/password is
still required to access the Web Management interface.
IP Allowed to
Access:
Enter the IP address used to access the DIR-840.
Remote Admin
Enter the port number used to access the DIR-840 is used in
Port:
the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the
Internet IP address of the DIR-840 and 8080 is the port used
for the Web Management interface.
D-Link DIR-840 User Manual
Tools
Admin
31
Advertisement
Table of Contents
