Deactivating Phone Lock - Aastra DT390 User Manual

C P
ORDLESS HONE FOR
16.4.3
16.4.4
89
MX-ONE™
1. Press
2. Press Yes.
Activating Phone Lock
Activating Phone lock will protect the phone from unauthorized use.
When this function is activated, the PIN code has to be entered at power
on. When activating Phone lock the PIN code that must be entered. The
PIN code is by default (0000) but it can be changed to any 4-8 digit code,
see Changing PIN Code on page 90.
To activate the phone lock, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select On, or On in charger, and press Select.
6. Enter the PIN code, and press OK.
7. Press Back to save the settings.
When the phone is locked,
Note: If configured in the WinPDM or CPDM3, it is possible to make an
emergency call while the phone or keypad is locked. During an
ongoing emergency call, the soft keys More and R are disabled.
If PIN code is lost it is possible to configure a new, or to do a
factory reset in WinPDM or CPDM3, contact the system adminis-
trator.

Deactivating Phone Lock

To deactivate the Phone lock function, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select Off, and press Select.
6. Enter the PIN code, press OK.
.
, and press Select.
, and press Select.
1424-EN/LZT 103 087 Uen F2 2012-03-02
is shown in the display.