Carefully unpack the screen. Always handle the screen in a leveled position on a clean surface. A. Flush Wall Mounting 1. Mark the location of where the screen is to be installed for the pre- drilled hole. 2. After marking the area and drilling the hole, insert the proper screw into the drilled hole and leave about 1/8”...
Page 3
SCREEN OPERATION Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch the screen case when the screen goes up or comes down to avoid damaging the screen material. 1.
Page 4
The installer must insure that the fasteners used are of adequate strength and suitable for the mounting surface chosen. Manual SRM Pro Series Dimensions Table Unit: mm...
A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option, replace or repair the defective unit with a replacement *(see exceptions below) after the defective unit is received. Once the product is received, Elite Screens will send out a replacement *unit to the customer by ground service (subject to inventory availability).
Page 6
Fax: +86-(0)755-8461-7669 info@elitescreens.com.cn www.elitescreens.com.cn Latin America Contact: erik.garcia@elitescreens.com Taiwan: East Asia Contact: info.ea@elitescreens.com Elite Screens Taiwan Co. Ltd. India Contact: info.india@elitescreens.com No.38, Alley 22, Lane 66, Sec. 5 Japan Contact: Nanjing E. Rd., Songshan District info.japan@elitescreens.com Taipei City 105, Taiwan (R.O.C)
Need help?
Do you have a question about the Manual SRM Pro Series and is the answer not in the manual?
Questions and answers