Elite Screens Manual Series User Manual
Manual pull-down screen with a dual case design for wall or ceiling installation
Hide thumbs
Also See for Manual Series:
- User manual (9 pages) ,
- Product manual (134 pages) ,
- Product catalog (72 pages)
Advertisement
Table of Contents
Manual Pull-down screen with a dual case design for wall or ceiling installation
Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
objects such as dust, saw dust, and/or liquids.
Note:
Regardless of the mounting method, the screen should be securely supported so that
when retracted, deployed, or even abusive pulling on the screen, the case will not become loose
or fall. The installer must insure that the fasteners used are of adequate strength and suitable for
the installation location.
v.12
Manual Series
www.elitescreens.com
info@elitescreens.com
User Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elite Screens Manual Series
Summary of Contents for Elite Screens Manual Series
- Page 1 User Guide Manual Series Manual Pull-down screen with a dual case design for wall or ceiling installation Pre-Installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. 3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign objects such as dust, saw dust, and/or liquids.
-
Page 2: Installation
Installation Flush Mount to the Wall ( Hardware not included ) 1. Mark the location of where the screen is to be installed and drill your holes. 2. Insert the proper screw and leave about 1/8” of an inch from the wall to mount the screen. 3. - Page 3 Screen Operation & Maintenance Note: Always pull the screen down or retract in a 90‐degree vertical angle. To avoid damaging the viewing surface, do not allow the viewing material to touch the screen case when deploying or retracting the unit. 1.
-
Page 4: Dimension Table
The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations. -
Page 5: Warranty Policy
• A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option replace or repair the defective unit with a replacement *(see exceptions below) after the defective unit or parts have been received. -
Page 6: Contact Information
16410 Manning Way | Cerritos | California 90703 www.elitescreens.com | info@elitescreens.com Tel: 877.511.1211 | Fax: 1.562.926.8433 ASIA: Elite Screens China Corp. Elite Screens Taiwan Ltd. Elite Screens Japan Corp. Longxi Duimianling Industry Zone 1F. No. 38 Alley 22 Lane 66 Sec. 5... - Page 7 Notes www.elitescreens.com - 7 - info@elitescreens.com...
- Page 8 www.elitescreens.com info@elitescreens.com...
Need help?
Do you have a question about the Manual Series and is the answer not in the manual?
Questions and answers