Elite Screens Spectrum Series User Manual

Elite Screens Spectrum Series User Manual

Electric wall/ceiling projection screen
Hide thumbs Also See for Spectrum Series:

Advertisement

Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top
Drop in the roller. Please be aware of this, as it will void your warranty with Elite Screens. Unapproved changes
or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will
void your warranty.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No
one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid
overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as should
be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious
damage or if there are any evident broken parts.
Rev. 091719-BR
Electric Wall/Ceiling Projection Screen
1

Spectrum Series

User's Guide (Z - Type)
www.elitescreens.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spectrum Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite Screens Spectrum Series

  • Page 1: Spectrum Series

    Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this, as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Hardware Parts List

    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3: Installation Instructions

    Installation Instructions For installation assistance, please consult a professional Installer. Elite Screens is not liable for faulty installations. A. Wall Mount (flushed) Step 1: Measure and mark the (A) distance between the Step 2: Drill a hole for each screw hole on the marked two holes on each bracket.
  • Page 4: Screen Operation

    RJ-45 input. 3. IR Remote Control: The Infrared functions by direct line of sight contact with a beam range of 30 feet. For more information, technical support or your local Elite Screens contact, please visit www.elitescreens.com...
  • Page 5 SCREEN MATERIAL DISCLAIMER: At first, the screen material may have a series of noticeable horizontal lines on its surface. These are known as memory lines. Memory lines are caused when the pliable projection material is rolled up and stored for the duration between its production and sale.
  • Page 6 Standard throw projected image shown below (waves are not visible) This short throw projected image shown below, demonstrates how waves on the surface become more pronounced: Actual Projection Images by two different Elite Screens model with Standard Throw Projector (Model #:ViewSonic Pro8300) vs. Short Throw Projector (Model # :BenQW710ST) Rev.
  • Page 7 Direct Sunlight Disclaimer Projection Screens from any maker are not designed for use as a window curtain and should never be exposed to direct sunlight. Prolonged exposure to solar radiation will destroy synthetic materials and such damage is not covered by our standard warranty. See examples below.

Table of Contents