Elite Screens Spectrum Series User Manual

Elite Screens Spectrum Series User Manual

Electric/motorized projection screen
Hide thumbs Also See for Spectrum Series:

Advertisement

Quick Links

Electric/Motorized Projection Screen
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedure below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO
extra Black Top Drop in the roller. Please be aware of this, as it will void your warranty with Elite
Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire
installations) to this unit are prohibited and will void your warranty. For more information, please
contact our Technical Support Department.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
Rev. V03022023DT (DS0241)
Spectrum Series
User Guide
www.elitescreens.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spectrum Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite Screens Spectrum Series

  • Page 1 Spectrum Series Electric/Motorized Projection Screen User Guide Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedure below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller.
  • Page 2 Installation Warning Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please contact Elite Screens Customer Service for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 5 Ways to control your Spectrum screen 1. IR Remote control (Item A, Fig 1): The Infrared functions by direct line of IR Lens sight contact using an effective beam range of 25 feet within a 30-degree angle. (IR remote only) Aim the IR remote directly at either the IR receiver on the Wall Box Controller or on the screen to operate the screen.
  • Page 4 4.Wired 5-12 volt trigger: Requires a 3.5mm to 3.5mm mono cable (not included) Step 1: Connect one end the RJ50 cable to the screen and the other end to the Wall box controller. Step 2: Then connect one end the 3.5mm mono cable to the wall box controller and the other to the projector.
  • Page 5 Press & Hold the “Programming Key + “Stop key” on the wall box controller. Installation Instructions Please consult a professional installer. Elite Screens is not liable for any faulty installations. 1. Select the installation location for your screen. Ensure that it is within reasonable proximity from your power source.
  • Page 6 The installer must ensure that proper mounting hardware and the fasteners used are of adequate strength and suitable for the mounting surface. For local Elite Screens contact or Technical Support, please visit www.elitescreens.com Rev. V03022023DT (DS0241) www.elitescreens.com...

Table of Contents