Table of Contents
Advertisement
Quick Links
Manual Pull-down screen with built-in slow retract mechanism
Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
Note:
Regardless of the mounting method, the screen should be securely supported so that
when retracted, deployed, or even abusive pulling on the screen, the case will not become loose
or fall. The installer must insure that the fasteners used are of adequate strength and suitable for
the installation location.
v.12
Manual SRM Series
www.elitescreens.com
info@elitescreens.com
User Guide
Advertisement
Table of Contents
Related Manuals for Elite Screens Manual SRM Series
Summary of Contents for Elite Screens Manual SRM Series
- Page 1 User Guide Manual SRM Series Manual Pull-down screen with built-in slow retract mechanism Pre-Installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. Note: Regardless of the mounting method, the screen should be securely supported so that when retracted, deployed, or even abusive pulling on the screen, the case will not become loose or fall.
- Page 2 Installation Flush Mount to the Wall 1. Mark the location of where the screen is to be installed for the pre-drilled hole. 2. After marking the area and drilling the hole, insert the proper screw into the drilled hole and leave about 1/8"...
- Page 3 Screen Operation & Maintenance Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch the screen case when the screen goes up or comes down to avoid damaging the screen mate- rial.
- Page 4 The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.
- Page 5 • A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option replace or repair the defective unit with a replacement *(see exceptions below) after the defective unit or parts have been received.
- Page 6 16410 Manning Way | Cerritos | California 90703 www.elitescreens.com | info@elitescreens.com Tel: 877.511.1211 | Fax: 1.562.926.8433 ASIA: Elite Screens China Corp. Elite Screens Taiwan Ltd. Elite Screens Japan Corp. Longxi Duimianling Industry Zone 1F. No. 38 Alley 22 Lane 66 Sec. 5...
- Page 7 Notes www.elitescreens.com - 7 - info@elitescreens.com...
- Page 8 www.elitescreens.com info@elitescreens.com...
Need help?
Do you have a question about the Manual SRM Series and is the answer not in the manual?
Questions and answers