Pre-installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. INSTALLATION Flush Wall Mounting 1. Mark the location of where the screen is to be installed for the pre-drilled hole. 2. After marking the area and drilling the hole, insert the proper screw into the drilled hole and leave about 1/8”...
SCREEN OPERATION Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch the screen case when the screen goes up or comes down to avoid damaging the screen material. 1.
The installer must insure that the fasteners used are of adequate strength and suitable for the mounting surface chosen. Manual SRM Series Dimensions Table Unit: mm...
A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option, replace or repair the defective unit with a replacement *(see exceptions below) after the defective unit is received. Once the product is received, Elite Screens will send out a replacement *unit to the customer by ground service (subject to inventory availability).
Page 7
India Elite Screens India Taiwan: Delhi, Inida Elite Screens Taiwan Co. Ltd. Tel: +91-22 98191257839 No.38, Alley 22, Lane 66, Sec. 5, Nanjing E. Rd., Fax: +91-22 22150373 Songshan District, Taipei City 105, Taiwan info.india@elitescreens.com Tel: +886-(02)2747-8979 www.elitescreens.com.in...
Need help?
Do you have a question about the Manual SRM Series and is the answer not in the manual?
Questions and answers