Download Print this page
Elite Screens Spectrum2 Series User Manual

Elite Screens Spectrum2 Series User Manual

Electric motorized projection screen

Advertisement

Quick Links

Electric Motorized Projection Screen
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedure below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved
changes or modifications (except for cutting the power cord for hardwire installations) to this unit are
prohibited and will void your warranty. For more information, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Rev.042613-JA
www.elitescreens.com
Spectrum2 Series
User's Guide
info@elitescreens.com
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Spectrum2 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite Screens Spectrum2 Series

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Installation Warning

    Elite Screens is not liable for any faulty installations. The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in the roller.
  • Page 3: Installation Instructions

    Bubble Leveler Installation Instructions Please consult a professional Installer. Elite Screens is not liable for faulty installations. Flush Mount to the Wall 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c).
  • Page 4 Mounting Bracket Mounting Bracket Fix Plate 1 Fix Plate 2 Case Slot 1 Mounting Bracket Case Slot 2 Screen Case Flush Mount to the Ceiling 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c).
  • Page 5 3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first Fix Plate, and securing the back of the case to the second Fix Plate. Make sure the case slots are securely attached to the Hanging Bracket. Fix Plate Fix Plate Suspended Ceiling using Chains...
  • Page 6 Built-in 3 Way Control Switch 1. The Spectrum2 Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5 meters in length. 2. Use the provided Bubble Level (f) to ensure the screen is level before plugging in the power cord...
  • Page 7 ZPM-RT Optional Remote Control Kit for Spectrum2 Series Please contact Elite Screens to purchase the optional ZPM-RT Remote Control Kit. 55” Red+ Green - IR Remote RF Remote D. IR “eye” receive E. 5-12V Trigger cable 3 Way Wall Switch G.