Related Manuals for Elite Screens Manual SRM Pro Series
Summary of Contents for Elite Screens Manual SRM Pro Series
- Page 1 Manual SRM Pro Series Premium Quality Manual Pull-Down Projection Screen User’s Guide 1/12/2015 www.elitescreens.com/info@elitescreens.com...
-
Page 2: Flush Wall Mounting
Carefully unpack the screen. Always handle the screen in a leveled position on a clean surface. A. Flush Wall Mounting 1. Mark the location of where the screen is to be installed for the pre-drilled hole. 2. After marking the area and drilling the hole, insert the proper screw into the drilled hole and leave about 1/8”... -
Page 3: Screen Operation
SCREEN OPERATION Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch the screen case when the screen goes up or comes down to avoid damaging the screen material. 1. - Page 4 The installer must insure that the fasteners used are of adequate strength and suitable for the mounting surface chosen. Manual SRM Pro Series Dimensions Table Unit: mm...
-
Page 5: Limited Warranty Policy
(7) days of receipt. If you report your claim after (7) days of receipt, but within (30) days of receipt, Elite Screens will, at its option, replace the part without charge, but you will bear the cost of Returns and Exchanges: If a return is needed, Elite Screens will issue you a Return Merchandise Authorization RMA Number.
Need help?
Do you have a question about the Manual SRM Pro Series and is the answer not in the manual?
Questions and answers