Parking Adjustment; Gear Shift Adjustment; Break-In - Joyner JNSZ800UV-R4 Owner's Manual

Parking Adjustment

 Pull the park brake lever up so that the unit can engage park brake.
 To release the unit, press button on front end of parking lever then push the parking lever to the
bottom.
 Adjust the parking cable if necessary.

Gear Shift Adjustment

Before operate the vehicle, check the shift
lever as to change gearshift from 1 to 5 and
reverse smoothly.
The shift lever should be vertical when the
gear is in neutral .If not, adjust the shift cable
and then tighten the nuts of the shift cable.

Break-in

The first month is most important in the life of your vehicle. Proper operation during this
break-in period will help assure maximum life and performance from your new vehicle. The
following guidelines explain proper break-in procedures.
1. After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
2. Drive vehicle from stop to low speed slowly.
3. Avoid braking strongly.
4. Do not exceed the vehicle speed on the below schedule.
The speed of vehicle
Max speed in each gear
The first 1000 km
1st Gear
2nd Gear
3rd Gear
4th Gear
5th Gear
42
Thin nut
15km/h
35km/h
55km/h
80km/h
95km/h