Seats And Safety Belts - Joyner JNSZ800UV-R4 Owner's Manual

Seats and Safety belts

Seats
The left seat and the right seat can remove.
To move a seat, pull its seat lock lever upward,
lift the front of the seat, and then slide the seat
forward and up.
To repair the engine and the battery conveniently,
the seats can be lifted just like the cargo bed .
It is very easy to install or uninstall the seats, see
the table of the content"seat and safety belt".
Safety belts
This vehicle is equipped with five-point
seat belts for both the operator and passenger.
Always wear the seat belt while riding in the vehicle.
To wear the seat belt properly, do the following:
1. Hold the latch plates as you pull the belts across
right shoulder, left shoulder, right leg, left leg
and among two legs. Make sure the belt is not
twisted and is not caught on any portion of the
vehicle, your clothing, or any equipment you
are carrying (see right picture).
2. Push the latch plates into the buckle, use a
hook connects the end of the belt which crosses
left leg and set level. Pull up on the latch plates
to make sure it is secure (see right picture).
3. Position the shoulder belt over your shoulder
and the leg belt over your leg. The shoulder belt
should fit against your shoulder and the leg belt
should fit against your leg. If it is loose, pull the
belt out all the way and then let it retract.
4. To release the buckle, lift and release the hook.
25