Indicator Lights; Pedal - Joyner JNSZ800UV-R4 Owner's Manual

Indicator lights

Reverse indicator light "R"
This indicator light comes on
when the drive select lever is "R" reverse position.
Energize of the battery indicator light
This indicator light comes on when the generator of the engine can't energize the battery. You
should check the generator and battery or get help from your JOYNER dealer.
Coolant temperature indicator light
It indicates the temperature of coolant, if the temperature is above 102
immediately. Check coolant lever and add if low, see authorized JOYNER dealer if temperature
indicator stay on and overflow tank is full of coolant.
Oil pressure indicator light
It indicates low/high oil pressure when illuminated, see authorized JOYNER dealer if necessary.

Pedal

Clutch pedal
Press the clutch pedal before you shift by
moving the drive select lever.
Brake pedal
Press the brake pedal to slow or stop the vehicle.
Accelerator pedal
Press the accelerator pedal down to increase
engine speed.
 Before starting the engine, you should check the three pedals to be they are operating
smoothly.
 Before starting the engine, you must make sure that the spring pressure can return the three
pedals to the rest position fully when released.
 If anyone of them can't work well, please correct the problem before operating the engine .If
you can't find or solve the problem yourself; please get the help from your JOYNER dealer.
" "
" "
" "
23
0
C. Stop engine