Lan Problems; Power Management Problems; Software Problems - Getac X500 G3 XQ2SZ5WDTDXL User Manual

LAN Problems

I cannot access the network.
Make sure that the LAN cable is properly connected to the RJ-45

connector and the network hub.
Make sure that the network configuration is appropriate.

Make sure that the user name or password is correct.


Power Management Problems

The computer does not enter Sleep or Hibernation mode
automatically.
If you have a connection to another computer, the computer does not

enter Sleep or Hibernation mode if the connection is actively in use.
Make sure that the Sleep or Hibernation time-out is enabled.

The computer does not enter Sleep or Hibernation mode
immediately.
If the computer is performing an operation, it normally waits for the

operation to finish.
The computer does not resume from Sleep or Hibernation mode.
The computer automatically enters Sleep or Hibernation mode when the

battery pack is empty. Do any one of the following:
−
Connect the AC adapter to the computer.
−
Replace the empty battery pack with a fully charged one.

Software Problems

An application program does not work correctly.
Make sure that the software is correctly installed.

If an error message appears on the screen, consult the software

program's documentation for further information.
87