Magnavox 50MF231D Manual page 8

_ii_Use of the remote control
Note: For most buttons pressing a button once will activate the function, Pressing a second time will de-activate Jr.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next Item Jn the list. The list will be removed automatically
after 6 seconds or press OK to remove immediately.
/
AV
Press this button repeatedly to select the
source - AVl, AV2, AV3, HDMI, SIDE or TV
when in TV mode, according to where you
connected the accessory devices (p. 20).
Color buttons
When functions attachedto the color
buttons, the color buttonsare shown on
screen,
CLOCK
on/off
Time display (for max. 10 minutes)
MENU
Settings menu on/off, see p. 7.
Exit menu from sub-menu.
VOL Volume
Press + or - to adjust the volume.
MUTE
Interrupt the sound or restore
it,
AICH
Press to alternate between the currently
viewed channeland the previously viewed
channel.
CLOCK
®®®
®®®
®
MAGNAVOX
/
INFO
Display information: Press to display (when
available) information about the selected TV
channel and program or accessory device.
OK
- to activate a setting
- to display the list of channels stored
(according to the selection made in the
Installation mode (Antenna or Cable), p. 8.
- starts playing content in the Home
Multimedia Browser application, p. 24.
Cursor buttons
Pressthe cursor buttonsup/down, lefdright t o
navigate through the menus.
CH Channel selection
- To browse through the TV channels or
sources stored in the preferred channel list
(see p. 19).
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 7.
Note: You don't have to start the installation
again once you have searched for and stored
the available TV channels,
Press the dot (.) for digital channels.
\
I English DFU 37131.indd 5 _ 2006-03-29 6:30:49 PM I