Magnavox 50MF231D Manual page 17

(__ TV menu .,,_
Press the MENU
button on the remote control to summon the Settings menu. The
TV menu gives you an overview of the menus you can select.
Note: Depending on the input signal, one or more_menu items may not be selectable.
Picture menu
Note: Some menu items are not available in case of liD sources.
_D Press the cursor right to select Picture.
_) Press the cursor right again to enter the Picture menu.
O Select the menu items with the cursor up/down.
O Adjust the settings with the cursor left/right or enter the list of submenu items
with the cursor right. Select a submenu item with the cursor up/down.
Auto picture
Select Auto picture to display a list of predefined picture settings, each
corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture
menu.
Note: This Magnavox TV has been set at the factory to look best in bnght store
environments which typically use fluorescent lighting. As your home will likely not be
as well lit as a store, we recommend that you cycle through the various auto picture
modes to find the one that best suits your own viewing conditions, Most consumers will
find that Natural is the correct choice.
Contrast
This will adjust the intensity of bright parts in the picture but keep the dark
parts unchanged.
Brightness
This will adjust the light output of the complete picture, which will mainly affect
the darker areas of the picture,
Color
This will adjust the saturation level of the colors to suit your personal
preference.
Sharpness
This will adjust the sharpness of fine details in the picture.
Color temperature
This will increase or decrease Warm (red) and Cool (blue) colors to suit
personal preferences.
Select Cool to give the white colors a blue, Normal to give the white colors a
neutral, Warm to give the white colors a red tint.
14
I English DFU 37131.indd 14 _ 2006-03-29 6:30:53 PM I