Magnavox 50MF231D Manual page 11

Select the menu language
O Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Use the cursor right to enter the Installation menu.
Select Language and enter the list of available languages with the cursor
right.
Select your language with the cursor up/down and press the OK button to
confirm you selection.
Proceed with the Installation menu.
Store TV channels
_[_ Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
Press the OK button.
Select Cable or Antenna in the Installation mode.
O
O
When Antenna is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in your local
area,
When Cable is selected, the TV will detect cable company supplied signals
and will search for cable TV (NTSC, ATSC, QAM modulated) channels
available in your area.
Make sure that registration with your cable TV provider and connection of
equipment are completed.
Press the green button _Next" on the remote control.
Note: All channels must be unlocked in order to autoprogr_m, If requested, enter
your PIN code to unlock all channels. See Menu preferences in the Settings, TV
menu, p, 14,
Press the green button "_$tart" to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed. The progress bar indicates the number of analog and digital TV
channels found.
When Autoprogramming is complete, a message appears confirming
the completion. Press the red button "Finish" and the TV returns to the
Installation menu.
I English DFU 37131.indd 8 _ 2006-03-29 6:30:51 PM I