Console Removal; Door Removal - Maytag MAH9700AW* Service Manual

Disassembly Procedures
!
6. Remove fill hose clamp and hose.

Console Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Dispenser Drawer.
4. Remove five screws attaching Console.
©2005 Maytag Services
WARNING
16025909 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
5. Roll Console down and lift away from washer.
6. Remove Reactor wire harness from wire clip.
7. Remove Reactor wire harness connector from the
PCB Board.
8. Remove five screws from PCB Housing to access the
LED Circuit Board.

Door Removal

1. Disconnect power supply to unit.
2. Remove four screws to remove door from Front
Panel.
29