Disassembly Procedures
!
18.Remove left and right Vent Hoses.
19.Lift Suspension Spring from keeper in cabinet.
Repeat for the opposite side and let Outer Tub rest
on support board.
20.Remove two screws securing Center Brace to Back
Guard.
38
WARNING
16025909 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
21.Remove remaining screws securing Back Guard to
cabinet.
22.Grasp the front and rear of the tub and slide out. Use
a blanket or rug to protect the floor
©2005 Maytag Services