Oven Cooking - Maytag PERFORMA PER4510 User Manual

Oven Cookin
Oven Control
Timer
Bake Broil Clock Timer
NOTE:The display will flashwhen the appliance is first connected to power or ifpower is interrupted. The display will stop flashing
once time-of-day clock has been set. The Bake,Broil and Timer indicators light when function is pressed.
Cancel Pad • The clock time cannot be set if the • A single beep signals the end of the
control is programmed for a bake, operation. "END" will appear in
Press to cancel all operations except the broil or timing operation, the display. If the time of day or
clock and timer.
2. Set the correct time of day using the A oven temperature is displayed
and • pads. If the • or • pad is not "END" will not appear.
• and • Pads
pressed within 30 seconds, the pro- • A short beep will sound every 30
gram will cancel. Press the Clock pad seconds for ten minutes to remind
Press and tap, or press and hold, to enter and begin again, you that the operation has corn-
the desired time,temperature, or to select pleted. "END" remains in the
HI or LO broil.
display until Cancel pad is
Setting the T/mer
pressed.
Bake Pad
The timer canbe setfromoneminute (:01) If desired, press the Clock pad
up to 11 hours and 50 minutes (11:50). and the time of day will reap-
Use for baking or roasting. Time will be displayed in minutes and
pear in the display during a
1. Press Bake pad. not in seconds. THE TIMER DOESNOT timing operation.
2. Press • or • pad to set the oven CONTROL THE OVEN.
temperature. 3. Press the Cancel pad and the time of
1. Press the Timer pad. day will reappear in the display.
Seepage 6 for additional information. • :00will light and the Timer indica-
tor light will flash in the display. To cancel the timer operation: Press and
Broil Pad
2. Pressthe • or • pad until the desired hold the Timer pad for several seconds.
time is displayed.
Use for top browning and broiling.
1. Press Broil pad. • The timer will begin as soon as the
Additional Information
2. Press • or • pad for Hi or Lobroil, time is set.
• The flashing colon indicates that a • A beep will sound each time a flmc-
See page 6 for additional information, timingoperationisinprogress. (The tion pad is pressed. There is no beep
colon will not flash if the time of for the • or • pad.
Setting the Clock day or oven temperature is • If a fault code (example: F2) is dis-
displayed.) played and beeps sound, press the
1. If the display is flashing, press the • The timer countdown will be Cancel pad. If the fault code contin-
Clock pad to stop the flashing, then displayed unless another function ues, see page 10.
press the Clock pad again, is programmed after setting the
• If the colonis not flashing, press the timer.
Clock pad.